Predicting user activity using an accelerometer on Intel based wearables

This project describes how to recognize certain types of human physical activities using acceleration data generated from the ADXL345 accelerometer connected to the Intel Edison board.

I have also published this project on the Intel Developer Zone site.

Human activity recognition has a wide range of applications especially in wearables. The data collected can be used monitoring patient activity, exercise patterns in athletes, fitness tracking and so on.

We will be using support vector machine learning algorithm to achieve this. The project is implemented using the LIBSVM library and done separately in both Python and node.js.

The set of activities to be recognized are running, walking, going up/down a flight of stairs and resting. We collect the accelerometer data over a set of intervals, extract the features which in this case are the acceleration values along the x,y and z axes. We then use this data for building a training model that will do the activity classification.

The project code can be downloaded from here

Hardware Implementation.

The diagram below shows the pin connection for the ADXL345 to the Intel® Edison board.


Part 1. Python Implementation.

Setting up LIBSVM

Download the LIBSVM library and transfer the  LibSVM  zipped folder to the Intel® Edison board root directory using WINSCP. Then extract it by running:

tar –xzf libsvm-3.21.tar.gz

Run  make in libsvm-3.21 directory

Run make in libsvm-3.21/python directory

Create the python script in the libsvm-3.21/python directory

Reading data from the ADXL345 accelerometer
import pyupm_adxl345 as adxl345
# Create an I2C accelerometer object
adxl = adxl345.Adxl345(0)
while True:
    adxl.update() # Update the data
    raw = adxl.getRawValues() # Read raw sensor data
    force = adxl.getAcceleration() # Read acceleration force (g)

Classifying the various activities

The training file contains instances of the various activities classified as;

2-up/down staircase

Below is the screenshot of a small section of the training file

training dataRunning a grid search to determine the best value for C:

The parameter C controls the tradeoff between errors of the SVM on training data and margin maximization. C is used during the training phase and says how much outliers are taken into account in calculating Support Vectors.

from svmutil import *
import numpy as nu

param = svm_parameter("-q -h 0")
y, x = svm_read_problem('activity.ds')
problem = svm_problem(y[:100], x[:100])
results = []
for c in range(-10,20):
  for g in range(-10,5):
    param.C, param.gamma = 2**c, 2**g
    m = svm_train(problem,param)
    p_lbl, p_acc, p_val = svm_predict(y[100:],x[100:],m)
    results.append([param.C, param.gamma, p_acc[0]])

bestIdx = nu.argmax(nu.array(results)[:,2])

print results[bestIdx]
grid-searchClassifying various user activities
#load the LIBSVM shared library:
from svmutil import *
#Construct an svm_problem instance where the activity.ds is the dataset with the training data
y, x = svm_read_problem('activity.ds')
#where y is the tuple of labels representing the various activities and x is a tuple of data instances representing acceleration values from x,y and z axes

m = svm_train(y[0:], x[0:], '-c 0.03125 -h 0 -b 1 -q')
#y[0:] and x[0:] means we train the model on the whole dataset array from the first instance[0] to the last
#-h disable shrinking heuristics
#-c : set the cost parameter C of C-SVC
#-q: quiet mode (no outputs)

values=[[float(forceX),float(forceY), float(forceZ)]]
#forceX,forceY and forceZ are data instances of the accelerometer values in x,y,z axes

 p_labels,p_acc,p_values = svm_predict([0]*len(values),values,m])
#pass the accelerometer values for prediction in the svm_predict() method which returns 
#p_labels: a list of predicted labels   p_acc: a tuple including accuracy and p_values: a list of decision values or probability estimates (if '-b 1' is specified)
print p_labels
#output the predicted labels to represent the predicted activity

classification python

Part 2. Node.Js Implementation

Create a new project directory in the board’s home root folder and install node-svm:

npm install node-svm

Copy the build and lib folder from the node-modules/node-svm to the project directory.

Next install the packages required by node-svm by running:

npm install <package-name>

The packages are Stringify-object, Mout, Graceful-fs, Optimist, Osenv, Numeric, Q and underscore.

Reading data from the ADXL345 accelerometer
Reading data from the ADXL345 accelerometer
var adxl345 = require('jsupm_adxl345');
var adxl = new adxl345.Adxl345(0);

    adxl.update(); // Update the data
    var raw = adxl.getRawValues(); // Read raw sensor data
    var force = adxl.getAcceleration(); // Read acceleration force (g)
    var rawvalues = raw.getitem(0) + " " + raw.getitem(1) + " " + raw.getitem(2);
    //console.log("Raw Values: " + rawvalues);
    var forceX=force.getitem(0).toFixed(2);
    var forceY=force.getitem(1).toFixed(2);
    var forceZ=force.getitem(2).toFixed(2);

}, 2000);

We can now write the code to classify user activity using the value of c we determined from running the grid search using Python in part 1.

var so = require('stringify-object');
var svm = require('./lib');
var numeric = require('numeric');
var fs = require('fs');
var fileName = './activity.ds';

//create the classifier
var clf = new svm.CSVC({
    c: 0.03125,
    normalize: false,
    reduce: false,

//Build the training model
    .then(function (dataset) {
        return clf.train(dataset)
            .progress(function (progress) {
                console.log('training progress: %d%', Math.round(progress * 100));
    .spread(function (model, report) {
        console.log('SVM trained. \nReport:\n%s', so(report));
    }).done(function () {

//Classify data instance at some interval
var prediction=clf.predictSync([forceX, forceY, forceZ]);
var probability=clf.predictProbabilitiesSync([forceX, forceY, forceZ]);

console output for node


The project covers how to determine the training parameters of the classifier using a grid search and running the classifier to be able to accurately predict various activities using LIBSVM in both Python and node.js.

Leave a Reply

Your email address will not be published. Required fields are marked *